Access & Intrusion Housings & Hardware
The electro-mechanical locking element prevents access to the armed zone of an intrusion detection system.
The 100mm Half Spindle is available with screw roller. It is applicable for mediator door fitting for full leaf version and tubular frame version.
The Half Spindle with Screw Roller is applicable for mediator door fittings.
The conventional block lock system consists, as a functional unit, of the block lock and the distributor. The evaluating module integrated in the block lock is connected to the distributor.
Security Half Spindles with Screw Roller has a length of 120mm and massive leaf thickness of 58mm to 68mm and tubular frame thickness of 68mm to 78mm.
Half Spindles with Screw Roller has a length of 130mm and massive leaf thickness of 68mm to 78mm.
2D Outdoor Kit provides the additional protection against rain and light incidence for 2D outdoor
The Half Cylinder is used in contact locks of modular operating unit program.
VdS Half Cylinder includes Core drawback protection.
Escape door strike with flat Strike/Face plate, DIN left. Electromagnetic locking element for doors in rescue routes with a maximum counter pressure capacity of 5000 N with FAFIX adjustment for easy mounting.
8 SATA storage expansion chassis incorporate a highly reliable SATA extension chip and offer high performance, low cost, and ease of use.
Z brackets for 8011-series locks feature a US28 satin aluminum finish.
Proximity reader having its own authorization request for controlling a door. Programming is very simple by means of programming cards.
Accessories for Locking Elements includes surface mounting kits, face plates, mounting aids.
Accessory Kit for Hollow Wall Mountings.
Accessory for IK3 and Accentic Reader are Housing bottom with cover contact and Mounting plate.
Adapter Base Operating Unit allows horizontal or vertical surface-mounted cable feed for running surface-mounted cables and mounting the reader on a metallic surface.
The Adjustable Locking Plate with 809 and 509x is used for electrical safety lock and motor lock.
Aluminum Protective Coating includes core drawback protector for SVP 2000 tubular frame locks and SVP 6000 full-leaf locks, checked for fire and emergency exit doors, short plate and long plate.
Angle brackets for ML8011 Series locks in a US28 satin aluminum finish.
The Angled Striking Plate is available with rounded-off edges for door strikes DIN R and DIN L.
Self-locking anti-panic key switches are electrically monitored, inward right, with divided follower having load current design includes electrically activated external handle and mechanical sequence protector.
Escutcheon with Aperio technology for inner doors for integration in Online Access Control. It is compatible to standard and tube frame doors and European mortise locks.
Aperio Premium Fitting for doors with a thickness of 40-45mm.
Aperio Standard Fitting provide basic fitting, reading electronics and handle outside, mechanical handle inside, for doors with a thickness of 40-50mm, MIFARE. The definition of the outside and inside length is done via the configurator.
Assembly Tool Set for XS-Cylinder Pro necessary for assembly and for changing the battery. It Consists of open-end wrench, knob pliers and 2 Torx screwdrivers T10 and T6.
BC-1 badge clips for photo ID cards, featuring a metal clip, a plastic band, and a metal snap.
The BUS-1 Tester allows all addresses to be tested for their transmission states and levels from any location on the BUS-1 branch. The address to be tested can be set on the test device using a coding switch.
The Back Plate for OmniAssure™ 2.0 XS Smart Reader is available with cable drain for OT3x reader
Battery Changing Tools are DLC battery changing tool for digital locking cylinders
The Bolt Switching Contact has electromechanical contacts with snap-action switching mechanism used for door opening monitoring. It has stable design and used where heavy duty application required.
Bolt switching contact electromechanical contacts with snap-action switching mechanism is used for Door opening monitoring.
Compact Surface Clamp/Holding magnet model for use in escape door controls. The advantage of the surface holding magnet is that it is easy to install.
The ACD contactless works in connection with a commercially available door lock as autonomous access control. The access rights can be changed without problems using the programming card set.
Cylinder Cover for security fitting N44 / N49.
DHE - series from Notifies is a range of Door Holder Extension Rods for the DH24120 Series Electromagnetic Door Holders. The DH – Series provides a wide range of Door Holder Extension Rods with various lengths and Multiple finished.
Anchor Plates are used in explosive environments and Ex. areas. Anchor Plates are advantageous for heavy doors or sliding gates in order to dampen possible impacts and thus protect the holding magnet and door against destruction.
DLC Adapter for Digital Locking Cylinders. The cylinder adapter lengths must be selected in accordance with the door details, taking into account the selected fittings.
DLC Adapter for Digital Locking Cylinders.
DLC Adapter for Digital Locking Cylinder are suitable for direction independent installation in PZ locks.
DLC Protective Rosettes increase the mechanical protection of the DLC cylinder from vandalism.
DLF LEGIC offline fittings have door handle right and they are available with profile cylinder hole.
DLF LEGIC Online Fitting has Online connection via Trafficpoint RS-485 for DLC and DLF online 022963.
DLF Monokey Slot Cylinder is used for DLF Inner Door Fitting.
Mounting kit for DLF inner door fitting for wooden doors and for screwing down the DLF internal escutcheon with the DLF external fitting, adjusted to the particular door leaf thickness
DigiReader Series provides an impressive array of solutions to meet the access control needs of any facility, including lowcost solutions that are priced competitively with less secure technologies
Decorative Film is exclusively designed for outdoor safety operating unit.
Distance Plate for Locker.
Door Accessories are high quality, durable and made from strong steel
The Door Module BUS-2 makes effective access control possible in conjunction with an intrusion detection control unit with BUS-2 technology. Up to 100 control and switching functions can be accessed via the operating unit keypad.
Door Fittings can be supplied in special steel or in anodized aluminum.
Door Fittings for full leaf version applicable for DIN left and DIN right. It is Suitable for Mediator lock.
The Door Strike includes monitoring contact, load current and no load current, with adjustable latch bolt, universal DIN L and DIN R. It can be used with flush and plain doors.
Doorguard Hardwired Version System Unit for monitoring emergency exit doors. It is Conventional connection technology.
Doorguard-Plus BUS-2 is a system unit for monitoring emergency exit doors with integrated IK2 / IK3 reader.
Dual-voltage electric door strikes provide over 1,300 lbs of holding force.
EXB-1 exit buttons with single-gang stainless steel mounting plates feature DPDT switch configuration. These buttons can be configured with momentary or latching contact status.
Load current door strikes are with standard flat face plate with dead bolt cut-out for front and inner door locks. Rescrewable for left-hand and right-hand mounting in compliance with the German standards (DIN).
Electric Door Strike with monitoring contact as potential-free changeover contact. This will be actuated by the latch.
Electro-Mechanical Blocking Elements prevents access to the armed zone of an intrusion detection system. They are provided with integrated magnetic contact for opening monitoring without additional contact.
The electro-mechanical locking element 3 prevents access to the armed zone of an intrusion detection system. The use of a locking element allows an intrusion detection system to be armed by means of several arming device at any desired location.
Emergency Buttons are accessories introduced under Escape door control units.
Escape Door Strike with flat face plate, DIN right Electromagnetic locking element for doors in rescue routes with a maximum counter pressure capacity of 5000N.
The Escape Door Strike 331 is available in 12V and 24V with fafix adjustment.
External Handle Pins components are adapted to one other, thus ensuring a problem-free installation of a complete lock with all add-on parts.
FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.
FT terminal housing TL-G 320 with NT is compact escape door terminal in a metal housing. The terminal is designed to accommodate the base and TMS control boards.
The Face Plate is available for IK3 and Accentic readers with keypad and without keypad. It is available in three different shades.
The Face plate is used to cover borders and/or screw holes of an existing door fitting which is to be replaced by an electronic one. It can be mounted below the electronic door fittings.
Fire Protection Module is used in the event of a fire or power failure.
Fitting Mifares are slim and are used for DIN drill holes.
Fixing Screws has Screw set for door fitting/door thickness consisting of 2xM8, 3xM6.
The Fixing Screw set is used for door fittings.
Fixing and Velcrotape for Accumulators. Flexible Velcrotape is suitable for fastening and fixing accumulators according to European Standard EN Part 2 and VdS guidelines 2540 (impact and vibration).
Flat face Plate is mounted in the door frame as counterpart to the door lock.
Escape Door Strike with flat face plate and DIN right Electromagnetic locking element for doors in rescue routes with a maximum counter pressure capacity of 5000N.
Flat Locking Plate for e-safety lock 809N and tube frame version.
Esser’s doors for FlexES modular fire detection system come in night- mode design. The two-hinged housing side doors are a new feature. For servicing work, the doors can be removed without the using tools and can be locked in place at the sides.
Snap-on bezels for use with FlexPass® proximity card readers.
Flush Mount Release Key is required for manual actuation of locking devices with double rocker switch insert. It is available in ABS plastic housing with white colour.
Flush Mounted Distributor Cover which can be used with 050162, 050163 and 050164 distributors. This Flush Mounted Distributor Cover are square in shaped and are available in quantity of 5 pieces.
Flush Mounted Emergency Exit Terminals are provided as a set including the appropriate switch range frame.
Panic Handle Pin for free wheeling side.
GW26618-2 is a plain red door.
The Mounting Plate is designed exclusively for Galaxy Access Control.
The Galaxy® Dimension series of security systems is a fully integrated intrusion and door control security solution for mid to large commercial security installations.
HHCWM Series weatherproof housings are dustproof and waterproof enclosures for 1/2 inch and 1/3 inch CCD cameras with fixed focal length or small zoom lenses.
Honeywell HL-S0125 is a HL Series Door Strike. They are fail secure door strikes with Aluminium face plates.
Honeywell HL Series electric locks include 300lbs, 600lbs and 1200lbs locks for different requirements. The HL series electric locks are suitable for various door types.
Honeywell HL Series electric locks include 600lbs and 1200lbs locks for different requirements. The HL locks are suitable for various door types single, dual, inswing, outswing, wooden, glass, frameless glass doors.
These Half Cylinder are used in lockable keypad units
The Honeywell Security Intruder Alarm Systems are Door-Guard Interface used to guard doors that require protection even when the Galaxy system is unset.
The housing component is introduced under the IGIS-LOOP network technology by Honeywell.
Replacement cover for IK operating unit 022198.
Ident Key 3 Bus-2 System enables the use of almost all common RFID technologies for arming / disarming and for access control.
Internal Lock Accessories has profiled cylinder perforation.
LCK1 Enclosure Lock
LEGIC Fitting is introduced under Wireless door systems and is designed for DIN drilling.
LWVMSCLP visitor badge strap clips come in packs of 100.
Lock Insert serves as a secure locking module for intrusion detection central units, Door code control device and additional housings etc. with complete mechanics and lock angle.
The configuration tool is designed for luminAXS mifare DESFire reader.
LuminAXS Sight Protection for LuminAXS readers to increased mechanical protection and protection against weather-related influences.
LuminAXS Sight Protection VdS is visual and weather protection for luminAXS readers according to VdS.
The LuminAXS reader is suitable for access control systems and for arming and disarming intruder systems.
Magnetic lock filler plates are made of aluminum and are for use with ML8011 Series locks.
The PW-Series Modular Control System is an advanced access control hardware architecture capable of providing solutions for large enterprise applications. The Intelligent Controller provides power and flexibility with its 32-bit architecture.
The Motor Lock DIN L-DIN R is available with mechanical and electrical sequence protector for operation via external motor lock control SVP-S2x DCW LON.
Motor Safety Locks automatically lock the door after closing.
Mounting Frame for Insertic Touch Readers.
The combination of mounting plate A04 and surface mounted housing A01 replaces the previous surface mounted housing A02.
Mounting Set for surface holding magnet for installation in flush mount door elements including spacer plates and fix counter unit.
Mounting Tools are accessories designed for Wireless door systems.
Single-gang adapter plate sets are compatible with all OP30 models in order to retrofit existing HID MiniProx readers.
OmniProx™ proximity card reader bezels come in packs of three.
OmniProx™ Series OP40 proximity card reader bezels feature the Honeywell logo.
The Outdoor Kit provides additional protection against rain and light incidence for 3D terminals in flush mounted version used in outdoor.
PEXB piezoelectric request to exit buttons are designed for indoor and outdoor use and feature an illuminated ring that changes color when the button is touched.
PIR and request to exit button kits include a PIR sensor (IS310WH) and a request to exit button (EXB-1).
The PW-Series Modular Control System is an advanced access control hardware architecture capable of providing solutions for large enterprise applications.
Panic Handle Pin for Panic Side.
Plastic Shield for Classic Readers and Keypads. Weather and privacy protection for IK2 control unit and IK2 keypads.
The Reson8 bell box brings together aesthetics and functionality in a product designed to exceed all the requirements of EN50131-4 – Security Grade 2, Environmental Class III.
Retractable Coil Badge Holder with Clip
Mini Fitting impresses with its compact construction and its modern, attractive design. It is suitable for European mortise locks, handles on both sides.
Safety locks internal handle pin accessories are designed depending on the door leaf thickness and the bolt length.
Single door small magnets are designed to accommodate low door clearance or minimum security applications and feature a holding force of 650 lbs (295 kg).
The Single Mounting Frame is available in surface mounting and flush mounting for wall reader.
The Slim Fitting LEGIC is an automatic access control for touchless write enabled transponders integrated in a door fitting. It is used when virtual network is required where data transfer via transponder.
The Fitting Mifare is an automatic access control for touchless write enabled transponders integrated in a door fitting. It uses the virtual network where data transfers via transponder.
The Smart Plug with UK Plug offer home automation capability with easy to use smart devices in addition to a Honeywell security wireless intruder systems. It can locally and remotely operate any device connected to them.
Special Face Plate is an accessory designed for switching devices.
SpectrAlert® Advance retrofit plates are a 9.5x7 inch retrofit plate that cover the footprint of the legacy SpectrAlert wall-mount speaker strobe. These retrofit plates are compatible with the horn strobe and speaker strobe lines.
The Mediator Electric Strike has been especially developed for this lock solution with fix adjustment and various striking plates. It is used for single locking with angled strike plate DIN right.
Standard Block Lock provides mechanical protection against drilling.
Standard Flat striking Plate with latch bolt aperture and dead bolt cutout.
The Surcharge is available for cylinders.
Surface Mounted Housing 1-Fold is a requirement for surface mounting of 1384 and 1385 models, additional surface-mounted housings are available in single, double and triple versions.
Switching devices decorative film accessories are used for surface-mounted outdoor safety operating units including logic or excluding logic and BUS-1 key-operated switch operating units.
Blanking Plate TE01 bus for the LON / LAN panel system. The Foil-coated blanking plate is used for the TG 12 wall table housing, 21 TE
The Frame/ Container is designed for power supply unit and battery.
TV 101 DCW door lock (closed-circuit principle) consist of sabotage and door monitoring contacts as well as integrated forced monitoring for active / inactive status.
TV 50x Door locks are electromagnetic locking elements for doors in escape routes that unlocks safely even if the door is pushed against the door by up to 5000 N. Mortise latch locks with adjustable latch are also used for installation in door leaf.
Tamper Switch Accessory for OmniAssure readers
The VdS Half Cylinder is used in safety control panels/IDENT-KEY operating unit
The tool for spindle replacement is required for the removal and installation of the handle spindle.
U.S. GangBox Mounting Kit for OT70.
Vandalism protection frames are designed for protection of WRMBH1 and WRMBL wall readers.
Esser’s wall and floor swivel brackets are specially intended for use with 960120 door magnet and thus allows floor or wall installation by means of distance pipe.
The System Sensors offers the most versatile and easy-to-use line of horns, strobes, and horn strobes in the industry. With white and red plastic housings, wall and ceiling mounting options, and plain and FIRE-printed devices.
The Fitting Mifare is an automatic access control for touchless write enabled transponders integrated in a door fitting. It is used when virtual network is required where data transfer via transponder.
Plugs are designed for closing the core hole of a cylinder adapter.
The xs pro fitting is an automatic access control integrated into a door fitting for proximity and smart cards. It has the advantage that it can be retrofitted to already existing doors without any wiring work.
The XS4 Fitting Mifares provides electronic offline fitting for access control on doors. These wireless access control components enables an uncomplicated mounting and refitting of existing doors by replacing the door fitting.
The additional housing is designed for installation of the MB-Secure motherboard which can be changed with a basic license to AXS4Secure. It is also designed for housing an AXS4Secure.
Start your search with category name, product name, part number, etc.
